| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/fpsimd: signal: Fix restoration of SVE context
When SME is supported, Restoring SVE signal context can go wrong in a
few ways, including placing the task into an invalid state where the
kernel may read from out-of-bounds memory (and may potentially take a
fatal fault) and/or may kill the task with a SIGKILL.
(1) Restoring a context with SVE_SIG_FLAG_SM set can place the task into
an invalid state where SVCR.SM is set (and sve_state is non-NULL)
but TIF_SME is clear, consequently resuting in out-of-bounds memory
reads and/or killing the task with SIGKILL.
This can only occur in unusual (but legitimate) cases where the SVE
signal context has either been modified by userspace or was saved in
the context of another task (e.g. as with CRIU), as otherwise the
presence of an SVE signal context with SVE_SIG_FLAG_SM implies that
TIF_SME is already set.
While in this state, task_fpsimd_load() will NOT configure SMCR_ELx
(leaving some arbitrary value configured in hardware) before
restoring SVCR and attempting to restore the streaming mode SVE
registers from memory via sve_load_state(). As the value of
SMCR_ELx.LEN may be larger than the task's streaming SVE vector
length, this may read memory outside of the task's allocated
sve_state, reading unrelated data and/or triggering a fault.
While this can result in secrets being loaded into streaming SVE
registers, these values are never exposed. As TIF_SME is clear,
fpsimd_bind_task_to_cpu() will configure CPACR_ELx.SMEN to trap EL0
accesses to streaming mode SVE registers, so these cannot be
accessed directly at EL0. As fpsimd_save_user_state() verifies the
live vector length before saving (S)SVE state to memory, no secret
values can be saved back to memory (and hence cannot be observed via
ptrace, signals, etc).
When the live vector length doesn't match the expected vector length
for the task, fpsimd_save_user_state() will send a fatal SIGKILL
signal to the task. Hence the task may be killed after executing
userspace for some period of time.
(2) Restoring a context with SVE_SIG_FLAG_SM clear does not clear the
task's SVCR.SM. If SVCR.SM was set prior to restoring the context,
then the task will be left in streaming mode unexpectedly, and some
register state will be combined inconsistently, though the task will
be left in legitimate state from the kernel's PoV.
This can only occur in unusual (but legitimate) cases where ptrace
has been used to set SVCR.SM after entry to the sigreturn syscall,
as syscall entry clears SVCR.SM.
In these cases, the the provided SVE register data will be loaded
into the task's sve_state using the non-streaming SVE vector length
and the FPSIMD registers will be merged into this using the
streaming SVE vector length.
Fix (1) by setting TIF_SME when setting SVCR.SM. This also requires
ensuring that the task's sme_state has been allocated, but as this could
contain live ZA state, it should not be zeroed. Fix (2) by clearing
SVCR.SM when restoring a SVE signal context with SVE_SIG_FLAG_SM clear.
For consistency, I've pulled the manipulation of SVCR, TIF_SVE, TIF_SME,
and fp_type earlier, immediately after the allocation of
sve_state/sme_state, before the restore of the actual register state.
This makes it easier to ensure that these are always modified
consistently, even if a fault is taken while reading the register data
from the signal context. I do not expect any software to depend on the
exact state restored when a fault is taken while reading the context. |
| In the Linux kernel, the following vulnerability has been resolved:
can: usb_8dev: usb_8dev_read_bulk_callback(): fix URB memory leak
Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb:
gs_usb_receive_bulk_callback(): fix URB memory leak").
In usb_8dev_open() -> usb_8dev_start(), the URBs for USB-in transfers are
allocated, added to the priv->rx_submitted anchor and submitted. In the
complete callback usb_8dev_read_bulk_callback(), the URBs are processed and
resubmitted. In usb_8dev_close() -> unlink_all_urbs() the URBs are freed by
calling usb_kill_anchored_urbs(&priv->rx_submitted).
However, this does not take into account that the USB framework unanchors
the URB before the complete function is called. This means that once an
in-URB has been completed, it is no longer anchored and is ultimately not
released in usb_kill_anchored_urbs().
Fix the memory leak by anchoring the URB in the
usb_8dev_read_bulk_callback() to the priv->rx_submitted anchor. |
| A vulnerability was found in WeKan up to 8.20. Affected by this issue is some unknown functionality of the file server/methods/positionHistory.js of the component Position-History Tracking. The manipulation results in missing authorization. The attack may be performed from remote. Upgrading to version 8.21 can resolve this issue. The patch is identified as 55576ec17722db094835470b386162c9a662fb60. It is advisable to upgrade the affected component. |
| A vulnerability was identified in iomad up to 5.0. Affected is an unknown function of the component Company Admin Block. Such manipulation leads to sql injection. The attack can be executed remotely. It is best practice to apply a patch to resolve this issue. |
| A security flaw has been discovered in Free5GC up to 4.1.0. This impacts the function identityTriggerType of the file pfcp_reports.go. The manipulation results in null pointer dereference. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks. Applying a patch is advised to resolve this issue. |
| A vulnerability was detected in libuvc up to 0.0.7. Affected is the function uvc_scan_streaming of the file src/device.c of the component UVC Descriptor Handler. The manipulation results in null pointer dereference. The attack needs to be approached locally. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was detected in abhiphile fermat-mcp up to 47f11def1cd37e45dd060f30cdce346cbdbd6f0a. This vulnerability affects the function eqn_chart of the file fmcp/mpl_mcp/core/eqn_chart.py. Performing a manipulation of the argument equations results in code injection. It is possible to initiate the attack remotely. The exploit is now public and may be used. This product is using a rolling release to provide continious delivery. Therefore, no version details for affected nor updated releases are available. The project was informed of the problem early through an issue report but has not responded yet. |
| Access control settings for forum post custom fields are not applied to the JSON output type, leading to an ACL violation vector an information disclosure |
| Address read vulnerability in the communication module.
Impact: Successful exploitation of this vulnerability may affect availability. |
| A vulnerability was identified in itsourcecode Student Management System 1.0. This affects an unknown function of the file /ramonsys/soa/index.php. Such manipulation of the argument ID leads to sql injection. The attack may be launched remotely. The exploit is publicly available and might be used. |
| Gogs is an open source self-hosted Git service. In version 0.13.3 and prior, an authenticated user can cause a DOS attack. If one of the repo files is deleted before synchronization, it will cause the application to crash. This issue has been patched in versions 0.13.4 and 0.14.0+dev. |
| Claude Code is an agentic coding tool. Prior to version 2.0.57, Claude Code failed to properly validate directory changes when combined with write operations to protected folders. By using the cd command to navigate into sensitive directories like .claude, it was possible to bypass write protection and create or modify files without user confirmation. Reliably exploiting this required the ability to add untrusted content into a Claude Code context window. This issue has been patched in version 2.0.57. |
| A vulnerability was identified in Portabilis i-Educar up to 2.10. Affected by this vulnerability is an unknown functionality of the file /intranet/meusdadod.php of the component User Data Page. Such manipulation of the argument File leads to cross site scripting. It is possible to launch the attack remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| calibre is an e-book manager. In 9.1.0 and earlier, a path traversal vulnerability in Calibre's EPUB conversion allows a malicious EPUB file to corrupt arbitrary existing files writable by the Calibre process. During conversion, Calibre resolves CipherReference URI from META-INF/encryption.xml to an absolute filesystem path and opens it in read-write mode, even when it points outside the conversion extraction directory. This vulnerability is fixed in 9.2.0. |
| A weakness has been identified in UTT 进取 520W 1.7.7-180627. This affects the function strcpy of the file /goform/formIpGroupConfig. Executing a manipulation of the argument groupName can lead to buffer overflow. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security vulnerability has been detected in UTT 进取 520W 1.7.7-180627. This vulnerability affects the function strcpy of the file /goform/formTimeGroupConfig. The manipulation of the argument year1 leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability has been found in UTT 进取 520W 1.7.7-180627. The affected element is the function strcpy of the file /goform/formPolicyRouteConf. Such manipulation of the argument GroupName leads to buffer overflow. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| 3DP-MANAGER is an inbound generator for 3x-ui. In version 2.0.1 and prior, the application automatically creates an administrative account with known default credentials (admin/admin) upon the first initialization. Attackers with network access to the application's login interface can gain full administrative control, managing VPN tunnels and system settings. This issue will be patched in version 2.0.2. |
| A vulnerability was determined in jsbroks COCO Annotator up to 0.11.1. This impacts an unknown function of the file /api/info/long_task of the component Endpoint. This manipulation causes denial of service. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| A flaw has been found in projectworlds Online Food Ordering System 1.0. This affects an unknown function of the file /view-ticket.php. Executing a manipulation of the argument ID can lead to sql injection. It is possible to launch the attack remotely. The exploit has been published and may be used. |
