| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| PraisonAI is a multi-agent teams system. In versions below 4.5.139 of PraisonAI and 1.5.140 of praisonaiagents, the browser bridge (praisonai browser start) is vulnerable to unauthenticated remote session hijacking due to missing authentication and a bypassable origin check on its /ws WebSocket endpoint. The server binds to 0.0.0.0 by default and only validates the Origin header when one is present, meaning any non-browser client that omits the header is accepted without restriction. An unauthenticated network attacker can connect, send a start_session message, and the server will route it to the first idle browser-extension WebSocket (effectively hijacking that session) and then broadcast all resulting automation actions and outputs back to the attacker. This enables unauthorized remote control of connected browser automation sessions, leakage of sensitive page context and automation results, and misuse of model-backed browser actions in any environment where the bridge is network-reachable. This issue has been fixed in versions 4.5.139 of PraisonAI and 1.5.140 of praisonaiagents. |
| Telesquare SKT LTE Router SDT-CS3B1 software version 1.2.0 contains an unauthenticated remote reboot vulnerability that allows attackers to trigger device reboot without authentication. Attackers can send POST requests to the lte.cgi endpoint with the Command=Reboot parameter to cause denial of service by forcing the router to restart. |
| A missing authentication for critical function vulnerability has been reported to affect QVR Pro. The remote attackers can then exploit the vulnerability to gain access to the system.
We have already fixed the vulnerability in the following version:
QVR Pro 2.7.4.14 and later |
| OneUptime is an open-source monitoring and observability platform. Prior to version 10.0.42, the Worker service's ManualAPI exposes workflow execution endpoints (GET /workflow/manual/run/:workflowId and POST /workflow/manual/run/:workflowId) without any authentication middleware. An attacker who can obtain or guess a workflow ID can trigger arbitrary workflow execution with attacker-controlled input data, enabling JavaScript code execution, notification abuse, and data manipulation. This issue has been patched in version 10.0.42. |
| A Missing Authentication for Critical Function vulnerability in command processing of Juniper Networks Junos OS allows a privileged local attacker to gain access to Linux-based line cards as root.
This issue affects systems running Junos OS using Linux-based line cards. Affected line cards include:
* MPC7, MPC8, MPC9, MPC10, MPC11
* LC2101, LC2103
* LC480, LC4800, LC9600
* MX304 (built-in FPC)
* MX-SPC3
* SRX5K-SPC3
* EX9200-40XS
* FPC3-PTX-U2, FPC3-PTX-U3
* FPC3-SFF-PTX
* LC1101, LC1102, LC1104, LC1105
This issue affects Junos OS:
* all versions before 22.4R3-S8,
* from 23.2 before 23.2R2-S6,
* from 23.4 before 23.4R2-S6,
* from 24.2 before 24.2R2-S3,
* from 24.4 before 24.4R2,
* from 25.2 before 25.2R2. |
| CLIENT_CERT authentication does not fail as expected for some scenarios when soft fail is disabled vulnerability in Apache Tomcat, Apache Tomcat Native.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.18, from 10.1.0-M7 through 10.1.52, from 9.0.83 through 9.0.115; Apache Tomcat Native: from 1.1.23 through 1.1.34, from 1.2.0 through 1.2.39, from 1.3.0 through 1.3.6, from 2.0.0 through 2.0.13.
Users are recommended to upgrade to version Tomcat Native 1.3.7 or 2.0.14 and Tomcat 11.0.20, 10.1.53 and 9.0.116, which fix the issue. |
| CLIENT_CERT authentication does not fail as expected for some scenarios when soft fail is disabled and FFM is used in Apache Tomcat.
This issue affects Apache Tomcat: from 11.0.0-M14 through 11.0.20, from 10.1.22 through 10.1.53, from 9.0.92 through 9.0.116.
Users are recommended to upgrade to version 11.0.21, 10.1.54 or 9.0.117, which fixes the issue. |
| Missing authentication for critical function in Azure IoT Explorer allows an unauthorized attacker to disclose information over a network. |
| Rate Limiting for attempting a user login is not being properly enforced, making HCL DevOps Velocity susceptible to brute-force attacks past the unsuccessful login attempt limit. This vulnerability is fixed in 5.1.7. |
| A vulnerability has been identified in Industrial Edge Management Pro V1 (All versions >= V1.7.6 < V1.15.17), Industrial Edge Management Pro V2 (All versions >= V2.0.0 < V2.1.1), Industrial Edge Management Virtual (All versions >= V2.2.0 < V2.8.0). Affected management systems do not properly enforce user authentication on remote connections to devices.
This could facilitate an unauthenticated remote attacker to circumvent authentication and impersonate a legitimate user.
Successful exploitation requires that the attacker has identified the header and port used for remote connections to devices and that the remote connection feature is enabled for the device.
Exploitation allows the attacker to tunnel to the device. Security features on this device itself (e.g. app specific authentication) are not affected. |
| CWE-307 Improper Restriction of Excessive Authentication Attempts vulnerability exists that would allow an attacker to gain access to the user account by performing an arbitrary number of authentication attempts with different credentials on a sequence of requests to multiple endpoints. |
| A low-privileged remote attacker can send Modbus packets to manipulate
register values that are inputs to the odorant injection logic such that
too much or too little odorant is injected into a gas line. |
| An issue was discovered in the Linux kernel 5.8.9. The WEP, WPA, WPA2, and WPA3 implementations reassemble fragments even though some of them were sent in plaintext. This vulnerability can be abused to inject packets and/or exfiltrate selected fragments when another device sends fragmented frames and the WEP, CCMP, or GCMP data-confidentiality protocol is used. |
| An issue was discovered on Samsung Galaxy S3 i9305 4.4.4 devices. The WPA, WPA2, and WPA3 implementations reassemble fragments with non-consecutive packet numbers. An adversary can abuse this to exfiltrate selected fragments. This vulnerability is exploitable when another device sends fragmented frames and the WEP, CCMP, or GCMP data-confidentiality protocol is used. Note that WEP is vulnerable to this attack by design. |
| An issue was discovered on Samsung Galaxy S3 i9305 4.4.4 devices. The WEP, WPA, WPA2, and WPA3 implementations accept second (or subsequent) broadcast fragments even when sent in plaintext and process them as full unfragmented frames. An adversary can abuse this to inject arbitrary network packets independent of the network configuration. |
| Vikunja is an open-source self-hosted task management platform. Prior to 2.3.0, the TOTP failed-attempt lockout mechanism is non-functional due to a database transaction handling bug. When a TOTP validation fails, the login handler in pkg/routes/api/v1/login.go calls HandleFailedTOTPAuth and then unconditionally rolls back. HandleFailedTOTPAuth in pkg/user/totp.go uses an in-memory counter (key-value store) to track failed attempts. When the counter reaches 10, it calls user.SetStatus(s, StatusAccountLocked) on the same database session s. Because the login handler always rolls back after a TOTP failure, the StatusAccountLocked write is undone. The in-memory counter correctly increments past 10, so the lockout code executes on every subsequent attempt, but the database write is rolled back every time. This allows unlimited brute-force attempts against TOTP codes. This vulnerability is fixed in 2.3.0. |
| TREK is a collaborative travel planner. Prior to 2.7.2, TREK served uploaded photos without requiring authentication. This vulnerability is fixed in 2.7.2. |
| The frontend gRPC server's streaming interceptor chain did not include the authorization interceptor. When a ClaimMapper and Authorizer are configured, unary RPCs enforce authentication and authorization, but the streaming AdminService/StreamWorkflowReplicationMessages endpoint accepted requests without credentials. This endpoint is registered on the same port as WorkflowService and cannot be disabled independently. An attacker with network access to the frontend port could open the replication stream without authentication. Data exfiltration is possible, but only when a configured replication target is correctly configured and the attacker has knowledge of the cluster configuration, as the history service validates cluster IDs and peer membership before returning replication data.
Temporal Cloud is not affected. |
| Under certain circumstances, a user opt-in setting that Focus should require authentication before use could have been be bypassed (distinct from CVE-2025-0245). This vulnerability was fixed in Firefox 136. |
| A Missing Authentication for Critical Function vulnerability in the Flexible PIC Concentrators (FPCs) of Juniper Networks Junos OS Evolved on PTX Series allows a local, authenticated attacker with low privileges to gain direct access to FPCs installed in the device.
A local user with low privileges can gain direct access to the installed FPCs as a high privileged user, which can potentially lead to a full compromise of the affected component.
This issue affects Junos OS Evolved on PTX10004, PTX10008, PTX100016, with JNP10K-LC1201 or JNP10K-LC1202:
* All versions before 21.2R3-S8-EVO,
* 21.4-EVO versions before 21.4R3-S7-EVO,
* 22.2-EVO versions before 22.2R3-S4-EVO,
* 22.3-EVO versions before 22.3R3-S3-EVO,
* 22.4-EVO versions before 22.4R3-S2-EVO,
* 23.2-EVO versions before 23.2R2-EVO. |
