| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
uacce: ensure safe queue release with state management
Directly calling `put_queue` carries risks since it cannot
guarantee that resources of `uacce_queue` have been fully released
beforehand. So adding a `stop_queue` operation for the
UACCE_CMD_PUT_Q command and leaving the `put_queue` operation to
the final resource release ensures safety.
Queue states are defined as follows:
- UACCE_Q_ZOMBIE: Initial state
- UACCE_Q_INIT: After opening `uacce`
- UACCE_Q_STARTED: After `start` is issued via `ioctl`
When executing `poweroff -f` in virt while accelerator are still
working, `uacce_fops_release` and `uacce_remove` may execute
concurrently. This can cause `uacce_put_queue` within
`uacce_fops_release` to access a NULL `ops` pointer. Therefore, add
state checks to prevent accessing freed pointers. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spi-sprd-adi: Fix double free in probe error path
The driver currently uses spi_alloc_host() to allocate the controller
but registers it using devm_spi_register_controller().
If devm_register_restart_handler() fails, the code jumps to the
put_ctlr label and calls spi_controller_put(). However, since the
controller was registered via a devm function, the device core will
automatically call spi_controller_put() again when the probe fails.
This results in a double-free of the spi_controller structure.
Fix this by switching to devm_spi_alloc_host() and removing the
manual spi_controller_put() call. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: fix potential underflow in virtio_transport_get_credit()
The credit calculation in virtio_transport_get_credit() uses unsigned
arithmetic:
ret = vvs->peer_buf_alloc - (vvs->tx_cnt - vvs->peer_fwd_cnt);
If the peer shrinks its advertised buffer (peer_buf_alloc) while bytes
are in flight, the subtraction can underflow and produce a large
positive value, potentially allowing more data to be queued than the
peer can handle.
Reuse virtio_transport_has_space() which already handles this case and
add a comment to make it clear why we are doing that.
[Stefano: use virtio_transport_has_space() instead of duplicating the code]
[Stefano: tweak the commit message] |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ctxfi: Fix potential OOB access in audio mixer handling
In the audio mixer handling code of ctxfi driver, the conf field is
used as a kind of loop index, and it's referred in the index callbacks
(amixer_index() and sum_index()).
As spotted recently by fuzzers, the current code causes OOB access at
those functions.
| UBSAN: array-index-out-of-bounds in /build/reproducible-path/linux-6.17.8/sound/pci/ctxfi/ctamixer.c:347:48
| index 8 is out of range for type 'unsigned char [8]'
After the analysis, the cause was found to be the lack of the proper
(re-)initialization of conj field.
This patch addresses those OOB accesses by adding the proper
initializations of the loop indices. |
| In the Linux kernel, the following vulnerability has been resolved:
can: mcba_usb: mcba_usb_read_bulk_callback(): fix URB memory leak
Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb:
gs_usb_receive_bulk_callback(): fix URB memory leak").
In mcba_usb_probe() -> mcba_usb_start(), the URBs for USB-in transfers are
allocated, added to the priv->rx_submitted anchor and submitted. In the
complete callback mcba_usb_read_bulk_callback(), the URBs are processed and
resubmitted. In mcba_usb_close() -> mcba_urb_unlink() the URBs are freed by
calling usb_kill_anchored_urbs(&priv->rx_submitted).
However, this does not take into account that the USB framework unanchors
the URB before the complete function is called. This means that once an
in-URB has been completed, it is no longer anchored and is ultimately not
released in usb_kill_anchored_urbs().
Fix the memory leak by anchoring the URB in the
mcba_usb_read_bulk_callback()to the priv->rx_submitted anchor. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: smbd: fix dma_unmap_sg() nents
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned. |
| In the Linux kernel, the following vulnerability has been resolved:
uacce: fix isolate sysfs check condition
uacce supports the device isolation feature. If the driver
implements the isolate_err_threshold_read and
isolate_err_threshold_write callback functions, uacce will create
sysfs files now. Users can read and configure the isolation policy
through sysfs. Currently, sysfs files are created as long as either
isolate_err_threshold_read or isolate_err_threshold_write callback
functions are present.
However, accessing a non-existent callback function may cause the
system to crash. Therefore, intercept the creation of sysfs if
neither read nor write exists; create sysfs if either is supported,
but intercept unsupported operations at the call site. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: Wake up the error handler when final completions race against each other
The fragile ordering between marking commands completed or failed so
that the error handler only wakes when the last running command
completes or times out has race conditions. These race conditions can
cause the SCSI layer to fail to wake the error handler, leaving I/O
through the SCSI host stuck as the error state cannot advance.
First, there is an memory ordering issue within scsi_dec_host_busy().
The write which clears SCMD_STATE_INFLIGHT may be reordered with reads
counting in scsi_host_busy(). While the local CPU will see its own
write, reordering can allow other CPUs in scsi_dec_host_busy() or
scsi_eh_inc_host_failed() to see a raised busy count, causing no CPU to
see a host busy equal to the host_failed count.
This race condition can be prevented with a memory barrier on the error
path to force the write to be visible before counting host busy
commands.
Second, there is a general ordering issue with scsi_eh_inc_host_failed(). By
counting busy commands before incrementing host_failed, it can race with a
final command in scsi_dec_host_busy(), such that scsi_dec_host_busy() does
not see host_failed incremented but scsi_eh_inc_host_failed() counts busy
commands before SCMD_STATE_INFLIGHT is cleared by scsi_dec_host_busy(),
resulting in neither waking the error handler task.
This needs the call to scsi_host_busy() to be moved after host_failed is
incremented to close the race condition. |
| A vulnerability in the web-based management interface of Cisco Prime Infrastructure could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against users of the interface of an affected system.
This vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by inserting malicious code into specific data fields in the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, an attacker must have valid administrative credentials. |
| A vulnerability in the text rendering subsystem of Cisco TelePresence Collaboration Endpoint (CE) Software and Cisco RoomOS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to insufficient validation of input received by an affected device. An attacker could exploit this vulnerability by getting the affected device to render crafted text, for example, a crafted meeting invitation. As indicated in the CVSS score, no user interaction is required, such as accepting the meeting invitation. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. |
| n8n is an open source workflow automation platform. Prior to versions 1.123.17 and 2.5.2, an authenticated user with permission to create or modify workflows could abuse crafted expressions in workflow parameters to trigger unintended system command execution on the host running n8n. This issue has been patched in versions 1.123.17 and 2.5.2. |
| n8n is an open source workflow automation platform. Prior to versions 1.123.12 and 2.4.0, when workflows process uploaded files and transfer them to remote servers via the SSH node without validating their metadata the vulnerability can lead to files being written to unintended locations on those remote systems potentially leading to remote code execution on those systems. As a prerequisites an unauthenticated attacker needs knowledge of such workflows existing and the endpoints for file uploads need to be unauthenticated. This issue has been patched in versions 1.123.12 and 2.4.0. |
| n8n is an open source workflow automation platform. Prior to versions 1.118.0 and 2.4.0, a vulnerability in the Merge node's SQL Query mode allowed authenticated users with permission to create or modify workflows to write arbitrary files to the n8n server's filesystem potentially leading to remote code execution. This issue has been patched in versions 1.118.0 and 2.4.0. |
| n8n is an open source workflow automation platform. From version 0.187.0 to before 1.120.3, a command injection vulnerability was identified in n8n’s community package installation functionality. The issue allowed authenticated users with administrative permissions to execute arbitrary system commands on the n8n host under specific conditions. This issue has been patched in version 1.120.3. |
| ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In versions 5.5.2, 5.4.3, 5.3.4, 5.2.6, and 5.1.6, a vulnerability exists in the WPS (Wi-Fi Protected Setup) Enrollee implementation where malformed EAP-WSC packets with truncated payloads can cause integer underflow during fragment length calculation. When processing EAP-Expanded (WSC) messages, the code computes frag_len by subtracting header sizes from the total packet length. If an attacker sends a packet where the EAP Length field covers only the header and flags but omits the expected payload (such as the 2-byte Message Length field when WPS_MSG_FLAG_LEN is set), frag_len becomes negative. This negative value is then implicitly cast to size_t when passed to wpabuf_put_data(), resulting in a very large unsigned value. This issue has been patched in versions 5.5.3, 5.4.4, 5.3.5, 5.2.7, and 5.1.7. |
| A maliciously crafted GIF file, when parsed through Autodesk 3ds Max, can cause a Stack-Based Buffer Overflow vulnerability. A malicious actor can leverage this vulnerability to execute arbitrary code in the context of the current process. |
| melange allows users to build apk packages using declarative pipelines. From version 0.14.0 to before 0.40.3, an attacker who can influence a melange configuration file (e.g., through pull request-driven CI or build-as-a-service scenarios) could read arbitrary files from the host system. The LicensingInfos function in pkg/config/config.go reads license files specified in copyright[].license-path without validating that paths remain within the workspace directory, allowing path traversal via ../ sequences. The contents of the traversed file are embedded into the generated SBOM as license text, enabling exfiltration of sensitive data through build artifacts. This issue has been patched in version 0.40.3. |
| Compressing is a compressing and uncompressing lib for node. In version 2.0.0 and 1.10.3 and prior, Compressing extracts TAR archives while restoring symbolic links without validating their targets. By embedding symlinks that resolve outside the intended extraction directory, an attacker can cause subsequent file entries to be written to arbitrary locations on the host file system. Depending on the extractor’s handling of existing files, this behavior may allow overwriting sensitive files or creating new files in security-critical locations. This issue has been patched in versions 1.10.4 and 2.0.1. |
| OpenClaw is a personal AI assistant. Prior to version 2026.1.29, there is an OS command injection vulnerability via the Project Root Path in sshNodeCommand. The sshNodeCommand function constructed a shell script without properly escaping the user-supplied project path in an error message. When the cd command failed, the unescaped path was interpolated directly into an echo statement, allowing arbitrary command execution on the remote SSH host. The parseSSHTarget function did not validate that SSH target strings could not begin with a dash. An attacker-supplied target like -oProxyCommand=... would be interpreted as an SSH configuration flag rather than a hostname, allowing arbitrary command execution on the local machine. This issue has been patched in version 2026.1.29. |
| Improper Check for Unusual or Exceptional Conditions vulnerability in Drupal Group invite allows Forceful Browsing.This issue affects Group invite: from 0.0.0 before 2.3.9, from 3.0.0 before 3.0.4, from 4.0.0 before 4.0.4. |
