| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
uacce: fix isolate sysfs check condition
uacce supports the device isolation feature. If the driver
implements the isolate_err_threshold_read and
isolate_err_threshold_write callback functions, uacce will create
sysfs files now. Users can read and configure the isolation policy
through sysfs. Currently, sysfs files are created as long as either
isolate_err_threshold_read or isolate_err_threshold_write callback
functions are present.
However, accessing a non-existent callback function may cause the
system to crash. Therefore, intercept the creation of sysfs if
neither read nor write exists; create sysfs if either is supported,
but intercept unsupported operations at the call site. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: Wake up the error handler when final completions race against each other
The fragile ordering between marking commands completed or failed so
that the error handler only wakes when the last running command
completes or times out has race conditions. These race conditions can
cause the SCSI layer to fail to wake the error handler, leaving I/O
through the SCSI host stuck as the error state cannot advance.
First, there is an memory ordering issue within scsi_dec_host_busy().
The write which clears SCMD_STATE_INFLIGHT may be reordered with reads
counting in scsi_host_busy(). While the local CPU will see its own
write, reordering can allow other CPUs in scsi_dec_host_busy() or
scsi_eh_inc_host_failed() to see a raised busy count, causing no CPU to
see a host busy equal to the host_failed count.
This race condition can be prevented with a memory barrier on the error
path to force the write to be visible before counting host busy
commands.
Second, there is a general ordering issue with scsi_eh_inc_host_failed(). By
counting busy commands before incrementing host_failed, it can race with a
final command in scsi_dec_host_busy(), such that scsi_dec_host_busy() does
not see host_failed incremented but scsi_eh_inc_host_failed() counts busy
commands before SCMD_STATE_INFLIGHT is cleared by scsi_dec_host_busy(),
resulting in neither waking the error handler task.
This needs the call to scsi_host_busy() to be moved after host_failed is
incremented to close the race condition. |
| A vulnerability in the web-based management interface of Cisco Prime Infrastructure could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against users of the interface of an affected system.
This vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by inserting malicious code into specific data fields in the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, an attacker must have valid administrative credentials. |
| A vulnerability in the text rendering subsystem of Cisco TelePresence Collaboration Endpoint (CE) Software and Cisco RoomOS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to insufficient validation of input received by an affected device. An attacker could exploit this vulnerability by getting the affected device to render crafted text, for example, a crafted meeting invitation. As indicated in the CVSS score, no user interaction is required, such as accepting the meeting invitation. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. |
| n8n is an open source workflow automation platform. Prior to versions 1.123.17 and 2.5.2, an authenticated user with permission to create or modify workflows could abuse crafted expressions in workflow parameters to trigger unintended system command execution on the host running n8n. This issue has been patched in versions 1.123.17 and 2.5.2. |
| n8n is an open source workflow automation platform. Prior to versions 1.123.12 and 2.4.0, when workflows process uploaded files and transfer them to remote servers via the SSH node without validating their metadata the vulnerability can lead to files being written to unintended locations on those remote systems potentially leading to remote code execution on those systems. As a prerequisites an unauthenticated attacker needs knowledge of such workflows existing and the endpoints for file uploads need to be unauthenticated. This issue has been patched in versions 1.123.12 and 2.4.0. |
| n8n is an open source workflow automation platform. Prior to versions 1.118.0 and 2.4.0, a vulnerability in the Merge node's SQL Query mode allowed authenticated users with permission to create or modify workflows to write arbitrary files to the n8n server's filesystem potentially leading to remote code execution. This issue has been patched in versions 1.118.0 and 2.4.0. |
| n8n is an open source workflow automation platform. From version 0.187.0 to before 1.120.3, a command injection vulnerability was identified in n8n’s community package installation functionality. The issue allowed authenticated users with administrative permissions to execute arbitrary system commands on the n8n host under specific conditions. This issue has been patched in version 1.120.3. |
| ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In versions 5.5.2, 5.4.3, 5.3.4, 5.2.6, and 5.1.6, a vulnerability exists in the WPS (Wi-Fi Protected Setup) Enrollee implementation where malformed EAP-WSC packets with truncated payloads can cause integer underflow during fragment length calculation. When processing EAP-Expanded (WSC) messages, the code computes frag_len by subtracting header sizes from the total packet length. If an attacker sends a packet where the EAP Length field covers only the header and flags but omits the expected payload (such as the 2-byte Message Length field when WPS_MSG_FLAG_LEN is set), frag_len becomes negative. This negative value is then implicitly cast to size_t when passed to wpabuf_put_data(), resulting in a very large unsigned value. This issue has been patched in versions 5.5.3, 5.4.4, 5.3.5, 5.2.7, and 5.1.7. |
| A maliciously crafted GIF file, when parsed through Autodesk 3ds Max, can cause a Stack-Based Buffer Overflow vulnerability. A malicious actor can leverage this vulnerability to execute arbitrary code in the context of the current process. |
| melange allows users to build apk packages using declarative pipelines. From version 0.14.0 to before 0.40.3, an attacker who can influence a melange configuration file (e.g., through pull request-driven CI or build-as-a-service scenarios) could read arbitrary files from the host system. The LicensingInfos function in pkg/config/config.go reads license files specified in copyright[].license-path without validating that paths remain within the workspace directory, allowing path traversal via ../ sequences. The contents of the traversed file are embedded into the generated SBOM as license text, enabling exfiltration of sensitive data through build artifacts. This issue has been patched in version 0.40.3. |
| Compressing is a compressing and uncompressing lib for node. In version 2.0.0 and 1.10.3 and prior, Compressing extracts TAR archives while restoring symbolic links without validating their targets. By embedding symlinks that resolve outside the intended extraction directory, an attacker can cause subsequent file entries to be written to arbitrary locations on the host file system. Depending on the extractor’s handling of existing files, this behavior may allow overwriting sensitive files or creating new files in security-critical locations. This issue has been patched in versions 1.10.4 and 2.0.1. |
| OpenClaw is a personal AI assistant. Prior to version 2026.1.29, there is an OS command injection vulnerability via the Project Root Path in sshNodeCommand. The sshNodeCommand function constructed a shell script without properly escaping the user-supplied project path in an error message. When the cd command failed, the unescaped path was interpolated directly into an echo statement, allowing arbitrary command execution on the remote SSH host. The parseSSHTarget function did not validate that SSH target strings could not begin with a dash. An attacker-supplied target like -oProxyCommand=... would be interpreted as an SSH configuration flag rather than a hostname, allowing arbitrary command execution on the local machine. This issue has been patched in version 2026.1.29. |
| Improper Check for Unusual or Exceptional Conditions vulnerability in Drupal Group invite allows Forceful Browsing.This issue affects Group invite: from 0.0.0 before 2.3.9, from 3.0.0 before 3.0.4, from 4.0.0 before 4.0.4. |
| Improper Neutralization of Input During Web Page Generation ("Cross-site Scripting") vulnerability in Drupal AT Internet Piano Analytics allows Cross-Site Scripting (XSS).This issue affects AT Internet Piano Analytics: from 0.0.0 before 1.0.1, from 2.0.0 before 2.3.1. |
| Mastodon is a free, open-source social network server based on ActivityPub. Prior to versions 4.3.19, 4.4.13, 4.5.6, Mastodon is vulnerable to web cache poisoning via `Rails.cache. When AUTHORIZED_FETCH is enabled, the ActivityPub endpoints for pinned posts and featured hashtags have contents that depend on the account that signed the HTTP request. However, these contents are stored in an internal cache and reused with no regards to the signing actor. As a result, an empty response generated for a blocked user account may be served to requests from legitimate non-blocked actors, or conversely, content intended for non-blocked actors may be returned to blocked actors. This issue has been patched in versions 4.3.19, 4.4.13, 4.5.6. |
| Godot MCP is a Model Context Protocol (MCP) server for interacting with the Godot game engine. Prior to version 0.1.1, a command injection vulnerability in godot-mcp allows remote code execution. The executeOperation function passed user-controlled input (e.g., projectPath) directly to exec(), which spawns a shell. An attacker could inject shell metacharacters like $(command) or &calc to execute arbitrary commands with the privileges of the MCP server process. This affects any tool that accepts projectPath, including create_scene, add_node, load_sprite, and others. This issue has been patched in version 0.1.1. |
| Navidrome is an open source web-based music collection server and streamer. Prior to version 0.60.0, a cross-site scripting vulnerability in the frontend allows a malicious attacker to inject code through the comment metadata of a song to exfiltrate user credentials. This issue has been patched in version 0.60.0. |
| Bytes is a utility library for working with bytes. From version 1.2.1 to before 1.11.1, Bytes is vulnerable to integer overflow in BytesMut::reserve. In the unique reclaim path of BytesMut::reserve, if the condition "v_capacity >= new_cap + offset" uses an unchecked addition. When new_cap + offset overflows usize in release builds, this condition may incorrectly pass, causing self.cap to be set to a value that exceeds the actual allocated capacity. Subsequent APIs such as spare_capacity_mut() then trust this corrupted cap value and may create out-of-bounds slices, leading to UB. This behavior is observable in release builds (integer overflow wraps), whereas debug builds panic due to overflow checks. This issue has been patched in version 1.11.1. |
| iccDEV provides a set of libraries and tools that allow for the interaction, manipulation, and application of ICC color management profiles. Prior to version 2.3.1.3, there is a heap buffer overflow (read) vulnerability in CIccIO::WriteUInt16Float() when converting malformed XML to ICC profiles via iccFromXml tool. This issue has been patched in version 2.3.1.3. |
