| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A use after free issue was addressed with improved memory management. This issue is fixed in iOS 18.3 and iPadOS 18.3, iPadOS 17.7.6, macOS Sequoia 15.3, macOS Sonoma 14.7.5, macOS Ventura 13.7.5, tvOS 18.3, visionOS 2.3, watchOS 11.3. A malicious application may be able to elevate privileges. Apple is aware of a report that this issue may have been actively exploited against versions of iOS before iOS 17.2. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Fix refcount bug and potential UAF in perf_mmap
Syzkaller reported a refcount_t: addition on 0; use-after-free warning
in perf_mmap.
The issue is caused by a race condition between a failing mmap() setup
and a concurrent mmap() on a dependent event (e.g., using output
redirection).
In perf_mmap(), the ring_buffer (rb) is allocated and assigned to
event->rb with the mmap_mutex held. The mutex is then released to
perform map_range().
If map_range() fails, perf_mmap_close() is called to clean up.
However, since the mutex was dropped, another thread attaching to
this event (via inherited events or output redirection) can acquire
the mutex, observe the valid event->rb pointer, and attempt to
increment its reference count. If the cleanup path has already
dropped the reference count to zero, this results in a
use-after-free or refcount saturation warning.
Fix this by extending the scope of mmap_mutex to cover the
map_range() call. This ensures that the ring buffer initialization
and mapping (or cleanup on failure) happens atomically effectively,
preventing other threads from accessing a half-initialized or
dying ring buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: pm8001: Fix use-after-free in pm8001_queue_command()
Commit e29c47fe8946 ("scsi: pm8001: Simplify pm8001_task_exec()") refactors
pm8001_queue_command(), however it introduces a potential cause of a double
free scenario when it changes the function to return -ENODEV in case of phy
down/device gone state.
In this path, pm8001_queue_command() updates task status and calls
task_done to indicate to upper layer that the task has been handled.
However, this also frees the underlying SAS task. A -ENODEV is then
returned to the caller. When libsas sas_ata_qc_issue() receives this error
value, it assumes the task wasn't handled/queued by LLDD and proceeds to
clean up and free the task again, resulting in a double free.
Since pm8001_queue_command() handles the SAS task in this case, it should
return 0 to the caller indicating that the task has been handled. |
| LIBPNG is a reference library for use in applications that read, create, and manipulate PNG (Portable Network Graphics) raster image files. In versions 1.2.1 through 1.6.55, `png_set_tRNS` and `png_set_PLTE` each alias a heap-allocated buffer between `png_struct` and `png_info`, sharing a single allocation across two structs with independent lifetimes. The `trans_alpha` aliasing has been present since at least libpng 1.0, and the `palette` aliasing since at least 1.2.1. Both affect all prior release lines `png_set_tRNS` sets `png_ptr->trans_alpha = info_ptr->trans_alpha` (256-byte buffer) and `png_set_PLTE` sets `info_ptr->palette = png_ptr->palette` (768-byte buffer). In both cases, calling `png_free_data` (with `PNG_FREE_TRNS` or `PNG_FREE_PLTE`) frees the buffer through `info_ptr` while the corresponding `png_ptr` pointer remains dangling. Subsequent row-transform functions dereference and, in some code paths, write to the freed memory. A second call to `png_set_tRNS` or `png_set_PLTE` has the same effect, because both functions call `png_free_data` internally before reallocating the `info_ptr` buffer. Version 1.6.56 fixes the issue. |
| The application does not properly validate the lifetime and validity of internal view cache pointers after JavaScript changes the document zoom and page state. When a script modifies the zoom property and then triggers a page change, the original view object may be destroyed while stale pointers are still kept and later dereferenced, which under crafted JavaScript and document structures can lead to a use-after-free condition and potentially allow arbitrary code execution. |
| The application's list box calculate array logic keeps stale references to page or form objects after they are deleted or re-created, which allows crafted documents to trigger a use-after-free when the calculation runs and can potentially lead to arbitrary code execution. |
| A specially crafted aggregation query with $lookup by an authenticated user with write privileges can cause a double-free or use-after-free memory issue in the slot-based execution (SBE) engine when an in-memory hash table is spilled to disk. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_gate: snapshot parameters with RCU on replace
The gate action can be replaced while the hrtimer callback or dump path is
walking the schedule list.
Convert the parameters to an RCU-protected snapshot and swap updates under
tcf_lock, freeing the previous snapshot via call_rcu(). When REPLACE omits
the entry list, preserve the existing schedule so the effective state is
unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: Only allow act_ct to bind to clsact/ingress qdiscs and shared blocks
As Paolo said earlier [1]:
"Since the blamed commit below, classify can return TC_ACT_CONSUMED while
the current skb being held by the defragmentation engine. As reported by
GangMin Kim, if such packet is that may cause a UaF when the defrag engine
later on tries to tuch again such packet."
act_ct was never meant to be used in the egress path, however some users
are attaching it to egress today [2]. Attempting to reach a middle
ground, we noticed that, while most qdiscs are not handling
TC_ACT_CONSUMED, clsact/ingress qdiscs are. With that in mind, we
address the issue by only allowing act_ct to bind to clsact/ingress
qdiscs and shared blocks. That way it's still possible to attach act_ct to
egress (albeit only with clsact).
[1] https://lore.kernel.org/netdev/674b8cbfc385c6f37fb29a1de08d8fe5c2b0fbee.1771321118.git.pabeni@redhat.com/
[2] https://lore.kernel.org/netdev/cc6bfb4a-4a2b-42d8-b9ce-7ef6644fb22b@ovn.org/ |
| Use after free in Web MIDI in Google Chrome on Android prior to 146.0.7680.178 allowed a remote attacker to execute arbitrary code via a crafted HTML page. (Chromium security severity: High) |
| Use after free in WebCodecs in Google Chrome prior to 146.0.7680.178 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| Use after free in Dawn in Google Chrome prior to 146.0.7680.178 allowed a remote attacker who had compromised the renderer process to execute arbitrary code via a crafted HTML page. (Chromium security severity: High) |
| Use after free in Dawn in Google Chrome prior to 146.0.7680.178 allowed a remote attacker who had compromised the renderer process to execute arbitrary code via a crafted HTML page. (Chromium security severity: High) |
| Use after free in WebGL in Google Chrome prior to 146.0.7680.178 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| Use after free in Dawn in Google Chrome prior to 146.0.7680.178 allowed a remote attacker to execute arbitrary code via a crafted HTML page. (Chromium security severity: High) |
| Use after free in CSS in Google Chrome prior to 146.0.7680.178 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| Use after free in PDF in Google Chrome prior to 146.0.7680.178 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted PDF file. (Chromium security severity: High) |
| Use after free in WebView in Google Chrome on Android prior to 146.0.7680.178 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Use after free in Navigation in Google Chrome prior to 146.0.7680.178 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Use after free in Compositing in Google Chrome prior to 146.0.7680.178 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
