| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| NanoMQ MQTT Broker (NanoMQ) is an all-around Edge Messaging Platform. Prior to version 0.24.10, in NanoMQ's webhook_inproc.c, the hook_work_cb() function processes nng messages by parsing the message body with cJSON_Parse(body). The body is obtained from nng_msg_body(msg), which is a binary buffer without a guaranteed null terminator. This leads to an out-of-bounds read (OOB read) as cJSON_Parse reads until it finds a \0, potentially accessing memory beyond the allocated buffer (e.g., nng_msg metadata or adjacent heap/stack). The issue is often masked by nng's allocation padding (extra 32 bytes of zeros for non-power-of-two sizes <1024 or non-aligned). The overflow is reliably triggered when the JSON payload length is a power-of-two >=1024 (no padding added). This issue has been patched in version 0.24.10. |
| Dual-Algorithm CertificateVerify out-of-bounds read. When processing a dual-algorithm CertificateVerify message, an out-of-bounds read can occur on crafted input. This can only occur when --enable-experimental and --enable-dual-alg-certs is used when building wolfSSL. |
| Wasmtime is a runtime for WebAssembly. From 25.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime with its Winch (baseline) non-default compiler backend may allow properly constructed guest Wasm to access host memory outside of its linear-memory sandbox. This vulnerability requires use of the Winch compiler (-Ccompiler=winch). By default, Wasmtime uses its Cranelift backend, not Winch. With Winch, the same incorrect assumption is present in theory on both aarch64 and x86-64. The aarch64 case has an observed-working proof of concept, while the x86-64 case is theoretical and may not be reachable in practice. This Winch compiler bug can allow the Wasm guest to access memory before or after the linear-memory region, independently of whether pre- or post-guard regions are configured. The accessible range in the initial bug proof-of-concept is up to 32KiB before the start of memory, or ~4GiB after the start of memory, independently of the size of pre- or post-guard regions or the use of explicit or guard-region-based bounds checking. However, the underlying bug assumes a 32-bit memory offset stored in a 64-bit register has its upper bits cleared when it may not, and so closely related variants of the initial proof-of-concept may be able to access truly arbitrary memory in-process. This could result in a host process segmentation fault (DoS), an arbitrary data leak from the host process, or with a write, potentially an arbitrary RCE. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. |
| Wasmtime is a runtime for WebAssembly. Prior to 24.0.7, 36.0.7, 42.0.2, and 43.0.1, Wasmtime contains a vulnerability where when transcoding a UTF-16 string to the latin1+utf16 component-model encoding it would incorrectly validate the byte length of the input string when performing a bounds check. Specifically the number of code units were checked instead of the byte length, which is twice the size of the code units. This vulnerability can cause the host to read beyond the end of a WebAssembly's linear memory in an attempt to transcode nonexistent bytes. In Wasmtime's default configuration this will read unmapped memory on a guard page, terminating the process with a segfault. Wasmtime can be configured, however, without guard pages which would mean that host memory beyond the end of linear memory may be read and interpreted as UTF-16. A host segfault is a denial-of-service vulnerability in Wasmtime, and possibly being able to read beyond the end of linear memory is additionally a vulnerability. Note that reading beyond the end of linear memory requires nonstandard configuration of Wasmtime, specifically with guard pages disabled. This vulnerability is fixed in 24.0.7, 36.0.7, 42.0.2, and 43.0.1. |
| Heap out-of-bounds read in PKCS7 parsing. A crafted PKCS7 message can trigger an OOB read on the heap. The missing bounds check is in the indefinite-length end-of-content verification loop in PKCS7_VerifySignedData(). |
| In Ubuntu, ubuntu-desktop-provision version 24.04.4 could leak sensitive user credentials during crash reporting. Upon installation failure, if a user submitted a bug report to Launchpad, ubuntu-desktop-provision could include the user's password hash in the attached logs. |
| In Ubuntu, Subiquity version 24.04.4 could leak sensitive user credentials during crash reporting. Upon installation failure, if a user submitted a bug report to Launchpad, Subiquity could include certain user credentials, such as the user's plaintext Wi-Fi password, in the attached logs. |
| Out-of-bounds read in Microsoft Office Excel allows an unauthorized attacker to disclose information locally. |
| Improper input validation in Windows Hyper-V allows an authorized attacker to execute code locally. |
| Improper input validation in Microsoft Office Excel allows an unauthorized attacker to disclose information locally. |
| A flaw was found in libarchive. This heap out-of-bounds read vulnerability exists in the RAR archive processing logic due to improper validation of the LZSS sliding window size after transitions between compression methods. A remote attacker can exploit this by providing a specially crafted RAR archive, leading to the disclosure of sensitive heap memory information without requiring authentication or user interaction. |
| A flaw was found in the GNU Binutils BFD library, a widely used component for handling binary files such as object files and executables. The issue occurs when processing specially crafted XCOFF object files, where a relocation type value is not properly validated before being used. This can cause the program to read memory outside of intended bounds. As a result, affected tools may crash or expose unintended memory contents, leading to denial-of-service or limited information disclosure risks. |
| Insufficient data validation in Media in Google Chrome prior to 147.0.7727.55 allowed a remote attacker to perform an out of bounds memory read via a crafted video file. (Chromium security severity: Low) |
| An out-of-bounds read vulnerability exists in the `DecodePsmctRle1` function of `DicomImageDecoder.cpp`. The `PMSCT_RLE1` decompression routine, which decodes the proprietary Philips Compression format, does not properly validate escape markers placed near the end of the compressed data stream. A crafted sequence at the end of the buffer can cause the decoder to read beyond the allocated memory region and leak heap data into the rendered image output. |
| An out-of-bounds read vulnerability exists in `DicomStreamReader` during DICOM meta-header parsing. When processing malformed metadata structures, the parser may read beyond the bounds of the allocated metadata buffer. Although this issue does not typically crash the server or expose data directly to the attacker, it reflects insufficient input validation in the parsing logic. |
| osslsigncode is a tool that implements Authenticode signing and timestamping. Prior to 2.13, an integer underflow vulnerability exists in osslsigncode version 2.12 and earlier in the PE page-hash computation code (pe_page_hash_calc()). When page hash processing is performed on a PE file, the function subtracts hdrsize from pagesize without first validating that pagesize >= hdrsize. If a malicious PE file sets SizeOfHeaders (hdrsize) larger than SectionAlignment (pagesize), the subtraction underflows and produces a very large unsigned length. The code allocates a zero-filled buffer of pagesize bytes and then attempts to hash pagesize - hdrsize bytes from that buffer. After the underflow, this results in an out-of-bounds read from the heap and can crash the process. The vulnerability can be triggered while signing a malicious PE file with page hashing enabled (-ph), or while verifying a malicious signed PE file that already contains page hashes. Verification of an already signed file does not require the verifier to pass -ph. This vulnerability is fixed in 2.13. |
| osslsigncode is a tool that implements Authenticode signing and timestamping. Prior to 2.13, an out-of-bounds read vulnerability exists in osslsigncode version 2.12 and earlier in the PE page-hash computation code (pe_page_hash_calc()). When processing PE sections for page hashing, the function uses PointerToRawData and SizeOfRawData values from section headers without validating that the referenced region lies within the mapped file. An attacker can craft a PE file with section headers that point beyond the end of the file. When osslsigncode computes page hashes for such a file, it may attempt to hash data from an invalid memory region, causing an out-of-bounds read and potentially crashing the process. The vulnerability can be triggered while signing a malicious PE file with page hashing enabled (-ph), or while verifying a malicious signed PE file that already contains page hashes. Verification of an already signed file does not require the verifier to pass -ph. This vulnerability is fixed in 2.13. |
| Wasmtime is a runtime for WebAssembly. From 32.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's Cranelift compilation backend contains a bug on aarch64 when performing a certain shape of heap accesses which means that the wrong address is accessed. When combined with explicit bounds checks a guest WebAssembly module this can create a situation where there are two diverging computations for the same address: one for the address to bounds-check and one for the address to load. This difference in address being operated on means that a guest module can pass a bounds check but then load a different address. Combined together this enables an arbitrary read/write primitive for guest WebAssembly when accesssing host memory. This is a sandbox escape as guests are able to read/write arbitrary host memory. This vulnerability has a few ingredients, all of which must be met, for this situation to occur and bypass the sandbox restrictions. This miscompiled shape of load only occurs on 64-bit WebAssembly linear memories, or when Config::wasm_memory64 is enabled. 32-bit WebAssembly is not affected. Spectre mitigations or signals-based-traps must be disabled. When spectre mitigations are enabled then the offending shape of load is not generated. When signals-based-traps are disabled then spectre mitigations are also automatically disabled. The specific bug in Cranelift is a miscompile of a load of the shape load(iadd(base, ishl(index, amt))) where amt is a constant. The amt value is masked incorrectly to test if it's a certain value, and this incorrect mask means that Cranelift can pattern-match this lowering rule during instruction selection erroneously, diverging from WebAssembly's and Cranelift's semantics. This incorrect lowering would, for example, load an address much further away than intended as the correct address's computation would have wrapped around to a smaller value insetad. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. |
| Out of bounds read and write in V8 in Google Chrome prior to 147.0.7727.55 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| Out-of-bounds read in Microsoft Office Excel allows an unauthorized attacker to execute code locally. |
